Reference Auto

Tips Care Motor Sport Injection Machine - Tech DOHC engine, the design of the present frame Truss Frame, engine cooling system using liquid-cooled system with auto fan, to forget include pro-link system for the rear suspension. Moreover, if not Honda CB 150R Streetfire!

Carrying sophistication Honda CBR150R, in Indonesia comes motors CB 150R as a representative of motor sport with naked models alias without a fairing. However, technological innovation Honda this one is useless if not supported by a qualified behavioral treatments.

Here are some tips on caring for CB150R motors, which can make injection motor Honda is durable and top performance continues!

Functioning injectors inject fuel at high pressure into the machine where the dose and time set by the ECU (Electronic Control Unit). In addition to play an important role in determining the combustion process in the combustion chamber, the device is also very decisive least wasteful fuel consumption of a motor. If the hose is dirty or leaking, the injector performance will not be maximized. Therefore, in addition to the fuel must be checked once every 2,000 kilometers.

When the motor streetfire has more than 50 thousand kilometers, or multiples thereof, should be performed examinations fuel pump. Detecting part of this one pretty easily, how simply turn the engine in places that are not noisy, then listen in the tank if there is ringing or whooshing sound. When this occurs, then fibrosis have to clean or drain the fuel tank. By the way, where fibrosis will get maximum results.

Busi is a fire lighters needed during the combustion process in the combustion chamber. Accuracy sparks from spark plugs with a blast of air mixed with fuel in the combustion chamber will determine whether or not perfect combustion process. Either plugs or better air filter is not dirty. Because if dirty spark plugs can make the process of incomplete combustion, whereas if a dirty air filter can blow dirty air into the engine combustion chamber. Moreover, given the composition of optimum combustion process is determined by the ideal air and fuel.

ECU is the brain that mixing the whole unit injector, a good dose of fuel is sprayed or unscrew the injector kelp. Thus, when the device is disturbed then the performance of the injector will not run properly. As a result of the destruction of this device is that it can cause the engine not want the alias strike. But the cause of the damage is mostly ECU over supply, low voltage electrical seumber, shorted due to water pressure and others.

Fuel quality affects the injection machine. Therefore, you should fibrosis using octane fuel in accordance with the standards of the manufacturer. The use of fuel that does not fit can cause tersembatnya hole injector, so that the spray quality or ability of the gas to the injectors to spray mist be less than perfect.

Motor CB150R Streetfire already injection technology, so the health of the battery needs to be considered. Given, injection systems that utilize electrical control as penghidup machines, supplies of fuel into the engine. Then clearly once the injection has electricity consumption, in this case is the battery. Then note the condition of the battery regularly, replace the battery immediately if it does not produce the motor electric current maximum.

Not to miss is the periodic service. Perform regular service every 3,000 kilometers or multiples thereof. This can be done on AHASS fibrosis throughout Indonesia, because only in AHASS who have the means to check the injector and other devices to support routine maintenance of motor sport.